What Is a Prefabricated Steel Structure Building?

A prefabricated steel structure building is a bolt-together steel frame system in which every column, rafter, purlin, and connection plate is precision-cut, drilled, and welded in our factory — then containerized and shipped to your site for rapid assembly.

Unlike traditional on-site steel fabrication (which is slow, weather-dependent, and expensive in most countries), our approach delivers:

· 30–50% faster construction compared to conventional steel erection

· Zero on-site welding — 100% bolted connections

· Lower total project cost through factory efficiency and reduced site labor

· Consistent quality — every component passes dimensional inspection before packing

This is not a "steel kit." This is a fully engineered structure, designed to your local wind, snow, and seismic loads.

Custom Engineering for Your Climate

· Not all steel buildings are the same. We design to your actual environmental loads:

5. Corrosion Protection That Lasts

· Steel only lasts if it's protected. Our standard finish is hot-dip galvanizing to ≥ 85μm zinc thickness, tested to ISO 1461. For coastal or aggressive environments, we offer:

· Heavy galvanizing (≥ 140μm)

· Duplex system: galvanizing + epoxy primer + polyurethane topcoat

· Stainless steel fasteners (A2-70 / A4-80 grade) for critical connections

· Corten (weathering) steel upon request

Case | 520 ㎡ Winery Fermentation & Storage Facility, Niagara, Ontario

Project Location: Niagara‑on‑the‑Lake, Niagara Peninsula, Ontario Building Type: Winery fermentation and oak‑barrel aging workshop Floor Area: 520 ㎡ (13 m × 40 m) Eave Height: 4.0 m; local height of 6.0 m (fermentation tank zone) Delivery Schedule: 20‑day design + 30‑day production + 25‑day land transportation & erection

Project Background

The client is a boutique winery in Niagara with an annual output of approximately 30,000 bottles of wine. Its original winemaking workshop was housed in a 19th‑century stone building with insufficient space. The newly‑built steel‑structure workshop is designed to accommodate stainless‑steel fermentation tanks, oak‑barrel storage and a tasting area. Its exterior must harmonize with the winery’s historic character.

Technical Solution

• Portal frame with a clear span of 13 m. The roof ridge is locally raised to 6.0 m in the fermentation‑tank zone to house 5 m‑high 5,000 L fermentation tanks.
• Exterior finishing: the steel structure is clad with cedar wood siding, paired with a limestone‑veneer base wall to match the style of the winery’s main building.
• Insulation: 100 mm PIR sandwich panels for the roof; 75 mm rock‑wool sandwich panels for walls.
• Fermentation zone: 200 mm reinforced‑concrete floor slab finished with acid‑resistant epoxy coating (to resist corrosion from wine acids); central drainage channel laid at a 1 % gradient.
• Oak‑barrel aging zone: temperature maintained at 12‑16 °C via passive thermal insulation supplemented by a ground‑source heat pump.
• Tasting area: exposed steel structure plus large‑area floor‑to‑ceiling glass, creating a striking blend of industrial aesthetics and wine‑culture ambiance.

Project Highlights

The hybrid steel‑and‑wood façade integrates seamlessly into the built context of the Niagara wine region and secured approval from the local Heritage Committee. Winemakers commented that the open, large‑volume space afforded by steel construction enables far more flexible layout of fermentation tanks and piping systems compared with the old stone building.

Frequently Asked Questions

· How long does it take from order to delivery?

· Typical timeline: design & engineering 15–25 working days + fabrication 25–50 working days + ocean freight (varies by destination; e.g., 22 days to West Africa, 30 days to Europe, 35 days to East Coast North America). Most projects arrive on site within 10–14 weeks of order confirmation.

· Do you provide CE / UKCA certification?

· Yes. Our fabrication facility holds EN 1090-2 EXC3 certification (the highest execution class for steel structures). We issue a Declaration of Performance (DoP) and CE/UKCA marking for all shipments to the European Union and United Kingdom.

· What is the minimum order?

· There is no fixed minimum — we handle everything from a single 200㎡ farm shed to a 30,000㎡ multi-building industrial park. Pricing per square meter improves with volume, but we treat every project with the same engineering rigor.