Galpones Metalicos Prefabricados Shed Industriales Bodega Galpon Prefabricadas Galpones Metal Building Kits

What Is a Prefabricated Steel Structure Building?

A prefabricated steel structure building is a bolt-together steel frame system in which every column, rafter, purlin, and connection plate is precision-cut, drilled, and welded in our factory — then containerized and shipped to your site for rapid assembly.

Unlike traditional on-site steel fabrication (which is slow, weather-dependent, and expensive in most countries), our approach delivers:

· 30–50% faster construction compared to conventional steel erection

· Zero on-site welding — 100% bolted connections

· Lower total project cost through factory efficiency and reduced site labor

· Consistent quality — every component passes dimensional inspection before packing

This is not a "steel kit." This is a fully engineered structure, designed to your local wind, snow, and seismic loads.

Technical Specifications

Primary Steel Frame

Secondary Structure

Enclosure System

Optional Features

· Overhead crane runway beams (up to 50T capacity)

· Mezzanine floor systems (steel deck + reinforced concrete)

· Ventilation: ridge vents, turbine ventilators, louvered sidewall openings

· Natural lighting: FRP skylight panels (translucent, UV-stabilized)

· Insulated sectional doors, high-speed roller doors, aircraft hangar sliding doors

Case Study  | 360 m² Steel-Structure Forage Storage Barn in Red Deer, Alberta
Location: Red Deer County, Alberta
Building Type: Hay/Forage Storage Barn
Building Area: 360 m² (12m × 30m)
Eave Height: 5.0m; Ridge Height: 6.8m
Delivery Timeline: Design (12 days) + Production (20 days) + Transport/Installation (15 days)
Project Background
The client, a beef cattle farmer in Central Alberta, required storage for approximately 400 tonnes of large round hay bales to last through the winter. Alberta winters are characterized by dry conditions, strong winds, and diurnal temperature fluctuations of up to 25°C. The structure required excellent natural ventilation to prevent hay mold while also withstanding the sudden, powerful gusts of the Chinook wind.
Technical Specifications
• Large-section portal rigid frame: 12m clear span, 6.0m column spacing; eave height raised by 1m above standard (to accommodate stacking large round bales three-high).
• Roofing: 0.5mm Al-Zn coated color steel sheet; Walls: 0.4mm corrugated color steel sheet (semi-open design with a 0.6m ventilation gap below the eaves).
• Wind-resistant design: Basic wind pressure set at 0.45 kPa (including gust factor); wind-resistant clips added to all purlins.
• Fully open gable ends: 5.0m × 5.5m sliding doors on both the east and west sides, creating a through-flow ventilation channel.
• Foundation: Precast concrete pier footings with steel column base plate anchoring; column bases elevated 300mm.
• Flooring: 150mm crushed stone sub-base + 100mm concrete slab (with 1% drainage slope).
Project Highlights
The design featuring open access at both ends enables a highly efficient "drive-through" workflow for tractors—large round bales can be hauled in one end and out the other without the need for reversing. The wind-resistant design for Chinook winds has withstood the test of two winters with no structural damage.

Customer Reviews

     I never thought I’d leave a positive review for a Chinese‑manufactured steel‑structure shelter, but here we are. To be honest, I chose you because your price was 30% lower than local quotes. Back then, I figured even if the quality was just “acceptable”, it would still be a good deal. But the actual delivered product, frankly speaking, is even better than the shelter I built back in 2019. The coating is still in perfect condition after two winters, and the roll‑up door operates much more smoothly.

Frequently Asked Questions

· How long does it take from order to delivery?

· Typical timeline: design & engineering 15–25 working days + fabrication 25–50 working days + ocean freight (varies by destination; e.g., 22 days to West Africa, 30 days to Europe, 35 days to East Coast North America). Most projects arrive on site within 10–14 weeks of order confirmation.

· Can you handle the structural design and calculations?

· Yes. Our in-house engineering team produces a complete structural package — frame analysis, connection design, foundation reaction tables, and anchor bolt layouts — referenced to your local building code. We can also coordinate with your local engineer of record for plan review and permit submission.

· What about installation? Do you provide site supervision?

· We strongly recommend our site supervision service for first-time clients: an experienced erection supervisor travels to your site to guide your local crew through the assembly. For repeat clients with trained crews, the bolt-together system is designed for self-erection using our color-coded manual.